The vertical weight of clinker is one of the references for evaluating the quality of clinker and the firing temperature in the kiln (mainly the temperature of the firing zone). By measuring the weight per liter of clinker particles with a particle size of 5mm-7mm, the weight per liter can be determined. The kiln condition is evaluated.vertical-metal-band-sawing-machine-g5480-260 Pour the clinker manually taken out from the clinker chain bucket machine onto the sieve, start the vibration motor, and sieve the vibrating screen so that the clinker smaller than 7mm leaks into the 5mm sieve through the sieve holes until the cooked material passes through the 5mm sieve every minute. vertical-metal-band-sawing-machine-g53 When the material does not exceed 30g, stop the vibration motor and pour the clinker remaining on the 7mm sieve. Pour the clinker with a vertical diameter of 5~7mm remaining on the 5mm sieve into the lifting cylinder, and use a glass plate to lift the clinker. vertical-metal-band-sawing-machine-g5360x160x600 Scrape off the clinker coming out of the mouth of the lifting cylinder to make it level with the surface of the lifting cylinder, and then weigh it.Note: Clean the sieve holes of the vibrating screen frequently to ensure that the sieve holes are clear.cnc-horizontal-metal-band-sawing-machine-gz4265
The vertical weight of clinker is one of the references for evaluating the quality of clinker and the firing temperature in the kiln (mainly the temperature of the firing zone). By measuring the weight per liter of clinker particles with a particle size of 5mm-7mm, the weight per liter can be determined. The kiln condition is evaluated.vertical-metal-band-sawing-machine-g5480-260 Pour the clinker manually taken out from the clinker chain bucket machine onto the sieve, start the vibration motor, and sieve the vibrating screen so that the clinker smaller than 7mm leaks into the 5mm sieve through the sieve holes until the cooked material passes through the 5mm sieve every minute. vertical-metal-band-sawing-machine-g53 When the material does not exceed 30g, stop the vibration motor and pour the clinker remaining on the 7mm sieve. Pour the clinker with a vertical diameter of 5~7mm remaining on the 5mm sieve into the lifting cylinder, and use a glass plate to lift the clinker. vertical-metal-band-sawing-machine-g5360x160x600 Scrape off the clinker coming out of the mouth of the lifting cylinder to make it level with the surface of the lifting cylinder, and then weigh it.Note: Clean the sieve holes of the vibrating screen frequently to ensure that the sieve holes are clear.cnc-horizontal-metal-band-sawing-machine-gz4265