Classification of trolley furnaces

The trolley furnace has different working methods and classification: the turning trolley furnace not only has a trolley that can enter and exit at the bottom, but also has an automatic turning mechanism through a specially designed trolley. Z3063X20 RADIAL DRILLING MACHINE After the trolley is driven out of the furnace, the turning trolley can be moved to At a certain angle, the workpiece on the trolley can quickly slide into the quenching tank to perform the quenching process, which solves the problem of slow transfer by manual operation.Z3080 RADIAL DRILLING MACHINE The double-door double-car furnace is different from the usual single-door car furnace. It has two front and rear doors and two trolleys. After each workpiece is processed, the trolley is driven out of the furnace. When the workpiece is cooled or processed, the other end After the trolley is loaded with workpieces, it can be driven into the furnace for heating immediately. Effect of Magnesium on Aluminum Alloy Vacuum Brazed Joints The furnace doors on both sides can be opened and closed freely. At the same time, the two trolleys can enter and exit alternately, which greatly improves the work efficiency. The trolley-type vacuum furnace is equipped with a vacuum tank on the trolley, which can be used for bright and non-oxidizing heating, quenching, annealing, tempering and other heat treatments and protective atmosphere spheroidizing annealing.The importance of brazing holding time