On the 5th, the Mirror reported on the hot summer weather in Kuwait, a Middle Eastern country with long, hot, dry, and sunny summers, with the title "The World's Most Inhabitable City, Summer Temperatures Often Exceeding 50 degrees Celsius, Even Streets Should Be Equipped with Air Conditioning"; In winter, it is cool, dry, and cloudy when sunny; There is wind all year round; The annual temperature is generally within the range of 8 ° C to 46 ° C, rarely below 4 ° C or above 48 ° C. As soon as Kuwait City, the capital of Kuwait, enters summer, almost no one walks outdoors. Specific data shows that since August this year, Kuwait has experienced a high temperature of 51 degrees Celsius. According to data, the summer temperatures in Kuwait have approached 50 ° C in recent years. Kuwait is a desert country, with a desert area accounting for over 90% of the national territory. It is extremely hot, hot, and dry without rain.
Kuwait's Arab Times reported that on the 2nd local time, the country's electricity load reached a record high of 16735 megawatts. According to reports, two-thirds of the residential electricity consumption in the country comes from air conditioning that operates almost uninterrupted throughout the day. Iranian businessman Ashkanani, who lives in Kuwait, said that during the hottest months of the summer, most of Kuwait's 4 million residents would flee abroad to seek shelter. Local meteorological experts say that in recent years, climate change has made the summer in Kuwait hotter, and extreme high temperatures have extended from two weeks to about a month. In recent years, the annual rainfall in Kuwait has been continuously decreasing, and the frequency and intensity of sandstorms have also increased.
Answer: First open the adjustment mode: (1) From the front room to the back room, press the forward button F3 of the pusher until the signal light 1 of the material hook hooked to the tray lights up, and then press the back button F4 of the push-pull device to move the tray Pull out until the material tray reaches the pulling position, Research on Sintering Technology of Silicon Carbide Ceramic Material the material hook is unhooked [unhook light 2 lights up] press F5 to open the middle door, press F3 to push the material tray into the back room, push it to the position and 4 lights up, the material hook returns to 5, The middle door is closed, the material hook returns to the original position, and the action stops. Effect of Vacuum Annealing on Alloy Sheet (2)The material tray goes from the back room to the front room, firstly raise the lifting platform, press the F3 material hook to 11, open the middle door, stop the material hook to 4, then press F3, Vacuum oil quenching and tempering spring steel wire (3)the material hook to the 13 grabbing position, Press F4, the material hook reaches 14, close the middle furnace door, the lifting table goes down to the oil tank, and the material hook returns to the original position.Ceramic-To-Metal Vacuum Brazing Services